Skip to content

Valves

Cylinder valves in 200, 232 and 300 bar versions: single-outlet and two-outlet valves, nitrox valves with M26x2 and G5/8 connections, and modular valves that can be combined into H valves, twin sets and sidemount configurations. Most have an M25x2 thread and an INT/DIN connection.

Choosing a valve

A single-outlet valve is enough for recreational diving. A two-outlet valve (H or V valve) takes two independent first stages, so if one free-flows in cold water you can close it and breathe from the other. Modular valves are joined into H valves or used on left and right sidemount cylinders.

1 port

Single-outlet valves in 200, 232 and 300 bar, with M25x2, 17E or 3/4 NPSM threads, and nitrox valves.

2 ports

H and V valves with two outlets, including a nitrox and a 300 bar version.

Modular valves

Left and right modular valves, H adapters, second outlets and closures for twin sets and sidemount.

Model overview

Key models from the subcategories at a glance.

Product Type Best for
Left Z valve II EN 144 single outlet, 232 bar recreational diving
Left Monovalve 300 bar single outlet, 300 bar, DIN 300 bar cylinders
Left Z valve Nitrox 26×2 EU (EN144) nitrox valve, M26x2 nitrox diving
Right H Valve EN 144 two outlets, 232 bar cold water, two first stages
Modular monovalve – left modular valve, 232 bar twin sets and sidemount

Thread, pressure and connection

The valve must match the cylinder thread. Most cylinders in Europe use M25x2. The 17E conical and 3/4 NPSM threads are found on some imported cylinders. The valve pressure must be at least that of the cylinder. An INT/DIN connection takes both a DIN regulator and, after removing the insert, an INT (yoke) regulator. A 300 bar valve is DIN only.

What to look for

  • Left or right. The side refers to the position of the handwheel. In twin sets and sidemount, left and right valves are combined.
  • Nitrox. Nitrox valves with an M26x2 or G5/8 connection prevent accidental use with air-only regulators.
  • Installation. Have the valve fitted by a filling station or service centre, with a new O-ring.

Care and maintenance

Rinse the valve in fresh water after diving with the dust cap fitted. Open and close it gently, never with force. Have it serviced with every cylinder inspection.

Frequently asked questions

Do I need a two-outlet valve?

For cold water and for diving where redundancy matters, yes: you can connect two independent first stages. For warm-water recreational diving, a single-outlet valve is enough.

What does EN 144 mean?

The European standard for cylinder valves, including the nitrox connection M26x2 (EN 144-3).